If your inverter is not giving output power to your appliances, this means your inverter is faulty, -not to worry- it can be easily resolved. 

I know it can be  frustrating, especially when you need an uninterrupted power supply for your business or home. This inverter issue is usually common and can also be avoided. In this guide, I’ll explain the possible causes of your inverter not supplying power to your appliances, how you can fix it, and how to prevent future inverter issues.

So let’s dive in…

Causes of Inverter Not Supplying Output Power

Here are 5 reasons why your inverter is not giving output power to your appliances:

 

1.Faulty or Loose Battery Connection

A loose or malfunctioning connection to the battery is one of the most frequent causes of your inverter operating but not producing power. The inverter won’t function as intended if corrosion or loose terminals prevent it from receiving electricity from the battery. 

Solution:

• Check the terminals of the batteries. Use a wire brush to remove any rust and tighten any loose connections.
• Verify the condition of the cables. To get power flowing again, replace any broken cables.

 

2. Low or Empty Battery

If your battery is low or completely dead, your inverter won’t be able to provide the necessary electricity. A power outage may result from an improperly charged battery or an outdated battery. 

Solution:

• Verify your solar panels or grid connection to ensure the battery is fully charged.
• For best results, consider getting a new battery if your current one is three to five years old. 

 

3.  Overloaded Inverter

There are power limitations on inverters, and going over them can result in the system shutting down. Your inverter will not be able to supply power if it has too many appliances or devices plugged in that require more power than it can handle. 

Solution:

• Remove all loads and circuits from the inverter output.
• Unplug and reconnect the inverter’s DC input 
• Verify the DC input, output, and power ratings of each AC load.
• Individually reattach each AC load, and make sure the entire load doesn’t exceed the inverter’s capacity. 
• Upgrade to a higher-capacity inverter if your household’s power requirements have grown.

 

4. Switched to Bypass Mode

There is a “bypass mode” on certain inverters that allows them to alternate between grid and battery power. In particular, if there is a shaky grid connection, the inverter may not be pulling power from the battery if it is stuck in this mode. 

Solution:

• Inverter bypass mode should be checked. Return it to inverter mode to resume using the battery.
• Make sure there is stability in your grid connection. 

 

5. Internal Problems with the Inverter

There are instances when the inverter itself is the issue. Even though it looks like the inverter is operating, internal problems like a blown fuse or circuit board malfunction can stop power from being delivered. 

Solution:

• To gently reset the inverter, turn it off, wait a few minutes, and then turn it back on.
• If the problem persists, get in touch with a professional technician to examine and fix the system. 

 

How to Avoid Power Problems with Inverters

Use these Inverter maintenance tips to prevent the inconvenience of your inverter operating without power:

• Using a dry cloth, clean all accumulated dust from surfaces and vents.
• Utilizing a multimeter, ascertain the voltages and currents of the various system components.
• Make that the PV array is charging the battery bank by visually inspecting all of the indications and displays.
• Make sure your battery connections are tight and clean by regularly inspecting them.
• Check the battery’s charge levels frequently, especially when using the device extensively.
• Stay within the inverter’s power limitations to prevent overloading it.
• To guarantee that everything functions properly, schedule professional maintenance for your inverter system. 

 

When to Call a Professional Technician

It is preferable to call in a professional if you have attempted troubleshooting your inverter and are still unable to get power. In addition to ensuring that your system is fixed correctly, a professional technician can identify deeper problems. 

 

Conclusion

While an inverter that isn’t producing power can be annoying, you can quickly restore normalcy to your system by following these easy adjustments. To ensure smooth performance, check your battery connections frequently, prevent overloading, and maintain your inverter well.

Do you need help with inverter upgrades or repairs? Our professional technicians are prepared to help! For a dependable,24/7 power solution that meets your demands, get in touch with us immediately. 

Call: 07037179294